Regulated Devices
Devices that are regulated with protection and have adjustable wattage in most cases.
FreeMax Marvos X 100W Kit. The FreeMax Marvos X is a single 18650 pod mod device. It comes with the MS Platform top fill child resistant pod tank with press fit FM COILTECH 5.0 Double D mesh coils 0.15 and a 0.25, Coil mesh material is SS904L with tea fiber wicking. The Marvos has an adjustable AFC. The Marvos mod goes from 5W to 100W in 0.5 increments. It has the full spectrum vape LED's but they can be turned off. It has 4 output modes Power, Smart, VPC and BYPASS. Charging via the C-Type USB 5V/2A. The battery door has a leather sticker attached and looks very nice. The fit and finish are excellent and the FM Chip 2.0 has all the safety features you will need. In my opinion as an 18650 mod it will not reach 100W and the most I would expect would be 75W, I think this is why it seems a little underpowered to me. All in all a nice mod to use although a little underpowered. This Video and channel is intended for 18 years and older UK, 21 Years and older USA. Disclaimer and dedication is at the end of this video. #thesalfordvaper The Salford Vaper email thesalfordvaper@mail.com Twitter @TheSalfordVaper Facebook Group The Salford Vaper You can also find me on Rumble, https://rumble.com/c/c-1647735 Cameras Sony ZV-1 Canon M50 Shure MV7 Microphone Donate link https://streamelements.com/thesalfordvaper/tip TSV's SIM Gaming Channel https://www.youtube.com/channel/UCEZEyFmnA-yoqyBRK2jpOeQ Created with Movavi Video Suite
Today I bring you an Innokin mod that is only available from VPZ in the Uk, I'm talking about the limited number Innokin Limax Kit. It's my understanding this was created for VPZ so numbers will be limited. The Innokin LiMax Kit is a 60W MTL kit that comes with the LiMax Tank. Pre-fitted to the tank is the 1.6 ohm coil and 0.65 ohm coil is spare in the box. This is a bit of a nostalgic mod with screen being the very familiar old Innokin screen. As far as a menu goes there really isn't one. The battery is a 3000 mAh internal battery with c-type charging. The LiMax tank is a top fill, top airflow tank. The afc can be dialed in to how you like to mouth to lung, it can be tight or open on the draw. the tank is 26.5mm so the mod can take tanks up to 26mm with ease. This did remind me of mods that came out around 2016 not only with the old type screen but the design as well. I found the LiMax tank not really for me. Fit and finish as usual second to none and it comes in three colours black, rainbow and stainless steel. The kit price is around £50. All in all not a bad kit but the tank was not to my liking. This Video and channel is intended for 18 years and older UK, 21 Years and older USA. Disclaimer and dedication is at the end of this video. #thesalfordvaper The Salford Vaper email thesalfordvaper@mail.com Twitter @TheSalfordVaper Facebook Group The Salford Vaper Cameras Sony ZV-1 Canon M50 Shure MV7 Microphone Donate link https://streamelements.com/thesalfordvaper/tip TSV's SIM Gaming Channel https://www.youtube.com/channel/UCEZEyFmnA-yoqyBRK2jpOeQ Created with Movavi Video Suite
Today we take a look at the FreeMax Maxus SOLO 100W Kit. The FreeMax Maxus is a single battery mod the can take an 18650 with provided adaptor, a 20700 and 21700. The kit comes with the FreeMax Fireluke Solo tank which is compatible with the FL platform. The dimensions of the Maxus Solo mod are 90mm x 42.8mm x 28.8mm. Output voltage is 0.7 to 7.5V, Input voltage is 3.3 to 4.2V (I think I said 33 to 42V in the review my bad), Resistance range is 0.1 ohms to 3 ohms, Output mode Power, Normal, Sport, Eco, VPC, Bypass, TC NI, TI, SS316 and TCR. Charging is 5V / 2A fast charge. Coils included are the FL1-D 0.15 mesh coil pre-fitted and the FL2 0.2 mesh coil as spare. The Fireluke tank is fitted with a child resistance top fill. The mod comes in 6 colours all with different back panels, you have a choice of Cobalt Blue, Black, Sea Blue, Golden, Gunmetal and Red. The novel mood LED's you will love or hate but the good news is you can turn them off. I found the fill port a little to small for most nozzles but still filled easily. The fit and finish are up there with the best. But the best feature for me is you can turn the mod off with the lock on the side of the mod. The FM 3.0 chip set has all the safety features built in that you can think off. Priced in the UK from £49.99 up to £64.99 The FreeMax Maxus SOLO Kit was sent in free for the purpose of review. No money was exchanged for the recording and upload of this review. All in all a very nice mod to use and well worth looking at. This Video and channel is intended for 18 years and older UK, 21 Years and older USA. Disclaimer and dedication is at the end of this video. #thesalfordvaper The Salford Vaper email thesalfordvaper@mail.com Twitter @TheSalfordVaper Facebook Group The Salford Vaper You can also find me on Rumble, https://rumble.com/c/c-1647735 Cameras Sony ZV-1 Canon M50 Shure MV7 Microphone Donate link https://streamelements.com/thesalfordvaper/tip TSV's SIM Gaming Channel https://www.youtube.com/channel/UCEZEyFmnA-yoqyBRK2jpOeQ Created with Movavi Video Suite
Today we take a look at one of the Christmas presents to myself, so here we go with the Pioneer4you IPV V200. This was a £30 bargain I got myself. The Pioneer4you IPV V200 is a 200w maximum box mod that is based around curves, three pre-programmed and three user defined programs. This is a dual 18650 mod that could have been made a little larger to take 21700 without taking anything away from the device. The fit and finish are next to none but I do have concerns about the woven material stickers on the battery doors. I can see them staining over time and starting to lift where you take the battery doors off. The device is ergonomic and sits in the hand very comfortably. The device has a centered 510 that can take attys up to 30mm always a bonus. The user defined curve menu is a bit fiddly but I'm sure with practice it will become much easier. The menu is very different to what most hobbyist like me are used to, even to change the wattage is a lot different. I'm sure though that once you get used to it it will become second nature. All in all a great mod that looks good as well. This Video and channel is intended for 18 years and older UK, 21 Years and older USA. Disclaimer and dedication is at the end of this video. #thesalfordvaper The Salford Vaper email thesalfordvaper@mail.com Twitter @TheSalfordVaper Facebook Group The Salford Vaper Cameras Logitech C920 Pro Canon M50 Shure MV7 Microphone TSV's SIM Gaming Channel https://www.youtube.com/channel/UCEZEyFmnA-yoqyBRK2jpOeQ Created with Movavi Video Suite
Today we take a look at the Vaporesso Target 200 Mod. The Vaporesso Target 200 has to be the most compact dual 18650 battery mod I've come across. it really does feel like the size of a single battery mod. The mod is lightweight without the batteries. The kit version comes with the new iTank and GTi mesh coils. The Vaporesso Target 200 is a 220W maximum device, It has preset modes for F(t), PUL and standard wattage. Hidden away in the menu you also get VV, Bypass and Smart Wattage (SMART is where the device reads the resistance of the coil and sets what it calculates as the best wattage). Its dimensions are around 88.6 X 42.8 X 33.7mm, output power is 5W to 220W, Charge current is 5V/2A Type C fast charge. it has a bright large colour TFT screen that's easy to see. The menu is easy to get round but your brain will tell you to hit the lowest button to move down when in fact this is a select button, as it's not between the up and down buttons like on other mods it will catch you out from time to time. The fit and finish are next to none as we have come accustomed to from Vaporesso. The mod feels great in the hand and very ergonomic. One let down is the raised 510 platform as it limits you to 25/26mm atomisers anything else on top will start to look odd. The mod is made from zinc alloy and the braid seems to be of a nylon plastic feel. The braid is waterproof but the mod isn't. To get the best from this mod set it to F(t) mode. Thank You to my friend Mr Bill Richards for purchasing this device for me. Your a good man with a big heart. All in all this is a great compact dual 18650 mod with more than enough features and power to satisfy any vaper. This Video and channel is intended for 18 years and older UK, 21 Years and older USA. Disclaimer and dedication is at the end of this video. #thesalfordvaper The Salford Vaper email thesalfordvaper@mail.com Twitter @TheSalfordVaper Facebook Group The Salford Vaper Cameras Logitech C920 Pro Canon M50 Mic Shure MV7 Canon M50 Shure MV7 Microphone TSV's SIM Gaming Channel https://www.youtube.com/channel/UCEZEyFmnA-yoqyBRK2jpOeQ Created with Movavi Video Suite
Today we take a look at the Lostvape Centaurus Quest BF Kit, this kit includes Lostvape's first RDA the Centaurus Solo RDA a single coil RDA. Lostvape are using the Quest 2.0 chip set in this device and to be honest this is one of the best chip sets out there. The menu is easy to get round and if you have had any device with the Quest 2 chip in you will know your way round the menu. The kit comes with one squonk bottle that's not fitted to the device but come's in a separate box along with a 9ml juice bottle that fits where the squonk bottle fits in case you want to use the device as a normal mod with tank or RDA meaning you have a nice 9ml bottle hidden away to carry spare e-liquid. The 9.5ml squonk bottle is bottom fill, i do struggle opening it up due to dexterity problems but for you guys you should have no problems whatsoever. As always the fit and finish to this device is top shelf. It's a comfortable mod to hold in the hand. At 100W its enough power for a squonker. You can use 21700, 20700 and 18650 with the provided adaptor. The device is made of zinc alloy. The device has Power, VV, bypass and TC, VPC to set the vape to how you like it and three memory modes that you can access from the front screen. All in all a very good squonk mod with a lot of choice as to how you want to use the device. This Video and channel is intended for 18 years and older UK, 21 Years and older USA. Disclaimer and dedication is at the end of this video. #thesalfordvaper The Salford Vaper email thesalfordvaper@mail.com Twitter @TheSalfordVaper Facebook Group The Salford Vaper Cameras Logitech C920 Pro Canon M50 Shure MV7 Microphone TSV's SIM Gaming Channel https://www.youtube.com/channel/UCEZEyFmnA-yoqyBRK2jpOeQ Created with Movavi Video Suite
Today we have one from the didn't get a review pile. I got this way back at the beginning of the year and as you guessed I liked it so it stayed out till I realised it hadn't been reviewed, I'm talking about the Lostvape Grus. The Lostvape Grus is a single battery mod that take a 21700, 20700 or 18650 with the supplied adaptor. The Lostvape grus has a maximum output of 100W and can fit up to a 30mm Atty. Modes include VW, VV, TC NI, TI and SS316. The Grus has a very quick fire time. Charging through the c-type port is safe and fast. It comes with all the usual safety features of a regulated mod. It's made of Zinc Alloy and has a bit of weight at 176g without a battery fitted. Dimensions 94.6 X 40.5 X3.0, coil resistance range is 0.1 ohm to 5 ohm's. The menu is easy to get around just by using the select button. Fit and finish are second to none. Priced around the £30 mark for the V1 and up to £45 for the V2. All in all a great single battery mod that feel very nice in the hand with everything that just works without fuss. This Video and channel is intended for 18 years and older UK, 21 Years and older USA. Disclaimer and dedication is at the end of this video. #thesalfordvaper #lostvape #grus The Salford Vaper email thesalfordvaper@mail.com Twitter @TheSalfordVaper Facebook Group The Salford Vaper Cameras Logitech C920 Pro Canon M50 Shure MV7 Microphone TSV's SIM Gaming Channel https://www.youtube.com/channel/UCEZEyFmnA-yoqyBRK2jpOeQ Created with Movavi Video Suite
Today we take a look at the new Vaporesso Target 80. The Vaporesso Target 80 has a 3000mAh built in battery, a large 510 plate and the Axon chip. The Target 80 Axon chip come with a new mode Ft which I think the chip monitors the heat from the coil and adjusts. I really can not gain anything from the short description of the new technology. The device has c-type fast charging at 5V 2Amps. It comes with the same pod tank we have seen with other Vaporesso devices and the pod tank takes the GTX coils. This Video and channel is intended for 18 years and older UK, 21 Years and older USA. Disclaimer and dedication is at the end of this video. #thesalfordvaper The Salford Vaper email thesalfordvaper@mail.com Twitter @TheSalfordVaper Facebook Group The Salford Vaper Cameras Logitech C920 Pro Canon M50 Rode NT-USB Microphone TSV's SIM Gaming Channel https://www.youtube.com/channel/UCEZEyFmnA-yoqyBRK2jpOeQ Created with Movavi Video Suite
Today we take a look at the Lost Vape Thelema Quest kit with the UB Pro tank. The Lost Vape Thelema Quest is a duel 18650 200w box mod. This is the Thelema without the DNA 250c chip but has a very good contender chip with the Quest 2, The tech numbers for the chip are very close to the DNA but not quite there. it has instant fire. There are three types in the series, clear, carbon and leather, giving you the choice of 11 colours. Dimensions 56.1 X 27.6 X 92.5 weight is 150G. Input voltage 6V to 8.4V. Output voltage 0.7V to 8.0V. Power range is 5W to 200W. Input current 1A to 40A. Temp range 200F to 600F. Resistance range 0.1ohm to 5.0ohm. The Lost Vape Thelema Quest supports Nickel, Titanium, SS316, SS904 and Kanthal. The mod is made of Zinc Alloy. The fit and finish are of the highest quality. the menu is easy to get around with a no nonsense look and feel to it. The UB Pro tank that comes with the TPD version I feel is a let down due to how the tank vapes as its a juice drinker but the 7ml tank is worth having a look at as the UB Pro coils give great flavour. All in all a solid mod from Lost Vape with a great price, I do recommend this mod for its build quality and its fit and finish. #lostvape #thelema #quest This Video and channel is intended for 18 years and older UK, 21 Years and older USA. Disclaimer and dedication is at the end of this video. #thesalfordvaper The Salford Vaper email thesalfordvaper@mail.com Twitter @TheSalfordVaper Facebook Group The Salford Vaper Cameras Logitech C920 Pro Canon M50 Rode NT-USB Microphone TSV's SIM Gaming Channel https://www.youtube.com/channel/UCEZEyFmnA-yoqyBRK2jpOeQ Created with Movavi Video Suite
Today we take a look at the single battery version of the Vaporesso Target. Yes today the Vaporesso Target 100 kit. The Vaporesso Target 100 is a single battery version in the Target family. It takes a single 21700/20700 or 18650 using the provided adaptor. It has the same menu as the Target 200 I reviewed not so long ago. It has that single hold down of the select button to move through the modes quickly or you can triple click the select button to enter the menu. The kit comes with the new iTank that I think is a really good stock coil tank, The GTI coils give great flavour and you get the 0.2 ohm pre-fitted and the 0.4 as a spare. The fit and finish of this mod is next to non as usual for Vaporesso. Priced around £35 to £40 in the UK. Links iTank Review https://youtu.be/Y7LjjYgnrVA Target 200 Review https://youtu.be/vmiaDoX2GUw All in all a great little single battery mod. This Video and channel is intended for 18 years and older UK, 21 Years and older USA. Disclaimer and dedication is at the end of this video. #thesalfordvaper The Salford Vaper email thesalfordvaper@mail.com Twitter @TheSalfordVaper Facebook Group The Salford Vaper Cameras Canon 700D Canon M50 Shure MV7 Microphone TSV's SIM Gaming Channel https://www.youtube.com/channel/UCEZEyFmnA-yoqyBRK2jpOeQ Created with Movavi Video Suite